Get A Quote

Solace

Description:

Sanga Solace Exterior Emulsion provides a rich and smooth finish for exterior walls. Its composition imparts excellent durability to the paint film, giving your walls that “Just Painted’ look year after year. Sanga Solace Emulsion is washable and most stains can be removed easily by sponging with a mild soap solution. The paint film is also fungus and mildew-resistant. Sanga Solace Emulsion is an exterior wall finish that can applied on all types of smooth plasters, false ceilings, asbestos sheets, concrete etc.

Material :

Technical Description

Finish: Smooth and semi gloss.

Gloss Levels / Sheen Levels: silky smooth.

Coverage: On smooth primer masonry surface by brushing.

1. Coats: 130 to 150 sq.ft / ltr.

2. Coats: 70 to 80 sq.ft / ltr.

Stability of Water-Based Paint: Use within 24 hours.

Shelf Life: 3 years from the date of manufacture when stored in original, tightly closed containers away from direct sunlight and excessive heat.

Note: Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and deep bright colours which may require an additional coat.

Precautions:

Kindly refer to the MSDS of Sanga Solace Emulsion for detailed safety information.
Do not apply when the ambient temperature is below 10°C or if it is likely to drop to this level within 4 hours of application.
Do not over-thin or overextend the brush.
Do not use strainers or additional colourants after tinting without approval from the Sanga Paints technical division.
Ensure horizontal surfaces such as window tops and edges are painted with 3 coats for enhanced protection.
Tinted paints must be thoroughly shaken immediately after water addition and before use.
Stir well before use.

Usage Instructions

Cleaning: Ensure that the surface to be painted is free from any loose paint, dust, or grease. Any previous growth of fungus, algae, or moss must be thoroughly removed by vigorous wire brushing and cleaning with water.

Filling: Minor surface imperfections such as holes, dents, and cracks up to 3mm should be filled using Sanga Crack Seal or Sanga Wall Putty to level the surface. Larger holes should be filled only with a mixture of white cement and fine sand in a 1:3 ratio.

Freshly Plastered Surfaces: Must be allowed to cure completely, and the pH level should be between 7–9 at the time of application.

Features

Safety Features:

Non-Flammable.
Kindly refer to the MSDS for Sanga Solace Emulsion for detailed safety information, available on request.
Store the container with the lid tightly closed in an upright position, in a cool and dry place.
Keep out of reach of children and away from eatables.
May be harmful if swallowed. In case of ingestion, seek immediate medical attention.
Wear eye protection during application. In case of eye contact, rinse immediately with plenty of water and seek medical advice.
In case of skin contact, wash immediately with soap and plenty of water. Seek medical attention if irritation develops or persists.
Do not breathe vapour or spray. Use suitable nose protection during sanding and surface preparation to avoid dust inhalation.
Do not pour leftover paint into drains or watercourses.
In the event of spills, contain the spillage using sand or earth.
No added lead, mercury, or chromium compounds.

Gallery

Product Showcase

No showcase content available for this product.